| Quantity: | |
|---|---|
43410-0W180
The GJF 43410-0W180 Drive Shaft is a high-quality replacement CV axle designed specifically for the Toyota ES350 and Lexus ES350 (GSV40 / GSV60) platforms. As a trusted manufacturer specializing in drive shafts, CV joints, inner joints, outer joints, and rubber boots, GJF delivers durable transmission components engineered to meet the requirements of both the aftermarket and OEM-level automotive repair industry.
Built with advanced production technology, precision machining, and strict quality control, the GJF CV axle ensures stable power transmission, smooth driving performance, and extended service life—even under demanding road conditions.
The 43410-0W180 drive shaft is a critical component of the front-wheel-drive system in the Toyota and Lexus ES series. It transfers torque from the transmission to the wheels while allowing movement of the suspension. Inferior CV axles may cause vibration, noise, and premature wear, but the GJF version is engineered to match or exceed the performance of the original part.
This drive shaft fits the following vehicles:
Toyota ES350
Lexus ES350 GSV40
Lexus ES350 GSV60
With a direct-fit design, the GJF CV axle ensures hassle-free installation for workshops, distributors, and professional automotive repair centers.
GJF uses premium alloy steel combined with advanced heat-treatment techniques to strengthen shaft integrity. The spline teeth are precisely machined to ensure smooth engagement and stable torque transmission. Each drive shaft undergoes dynamic balancing, which minimizes vibration during high-speed rotation.
Reinforced solid axle shaft for higher torque capacity
Precision-ground joints for smoother motion
High-performance grease for long-lasting lubrication
Corrosion-resistant surface treatment for extended lifespan
Strengthened rubber boots designed to prevent cracking, leaking, and dust contamination
These design and material innovations allow the drive shaft to withstand long-term operation in diverse climates and road conditions.
The inner and outer CV joints are engineered with multi-stage ball grooves to ensure smooth articulation during steering and suspension travel. GJF uses strictly selected steel ball bearings and cage structures to minimize friction and noise.
Reduced noise and vibration
Stable torque delivery at turning angles
Enhanced joint stability for long-term performance
Optimized sealing to prevent grease leakage
The CV joint boot is made from durable rubber compounds with excellent resistance to heat, cold, moisture, and chemical exposure. This helps protect the internal assembly and greatly extends service life.
·Smooth Driving Experience
One of the core advantages of the GJF 43410-0W180 drive shaft is the ability to provide a smooth and stable ride. Thanks to precision balancing and optimized spline engagement, the axle minimizes vibration—even during high-speed acceleration or when driving over uneven surfaces.
Reduced drivetrain vibration
Improved steering stability
Consistent power delivery under load
Better handling and comfort
Drivers will experience significant improvement in road feel and noise reduction when replacing a worn OE drive shaft with the GJF unit.
GJF is committed to manufacturing reliable, long-lasting CV axles for global aftermarket customers. Every drive shaft is tested and inspected before packing.
Dynamic balancing
Hardness verification
Material inspection
Grease control and boot sealing test
Final performance simulation under working load
With decades of expertise in producing automotive transmission components, GJF is recognized by wholesalers and distributors worldwide for stable quality and competitive pricing.
The 43410-0W180 drive shaft is a high-demand model for the Toyota and Lexus ES series, making it an excellent inventory choice for:
Auto parts wholesalers
Retail stores
Repair workshops
Fleet maintenance providers
Online sellers (eBay, Amazon, Shopify)
GJF supports long-term supply, consistent product quality, and customizable packaging solutions. The brand’s red and silver packaging emphasizes professionalism and protects the axle during long-distance transportation.
GJF specializes in drive shafts, CV joints, inner joints, outer joints, tripod joints, and dust boots. Our commitment to quality makes us a preferred partner for customers targeting both aftermarket and OEM sectors.
Mature production system for transmission parts
Strong R&D capability for new models
Technical manufacturing, precision standards
Wide product range covering Asian, American, and European vehicles
Fast delivery and stable stock for popular references
GJF continues to expand its global presence, providing reliable transmission solutions for distributors, wholesalers, and automotive industry partners.
The GJF 43410-0W180 Drive Shaft is a high-quality replacement CV axle designed specifically for the Toyota ES350 and Lexus ES350 (GSV40 / GSV60) platforms. As a trusted manufacturer specializing in drive shafts, CV joints, inner joints, outer joints, and rubber boots, GJF delivers durable transmission components engineered to meet the requirements of both the aftermarket and OEM-level automotive repair industry.
Built with advanced production technology, precision machining, and strict quality control, the GJF CV axle ensures stable power transmission, smooth driving performance, and extended service life—even under demanding road conditions.
The 43410-0W180 drive shaft is a critical component of the front-wheel-drive system in the Toyota and Lexus ES series. It transfers torque from the transmission to the wheels while allowing movement of the suspension. Inferior CV axles may cause vibration, noise, and premature wear, but the GJF version is engineered to match or exceed the performance of the original part.
This drive shaft fits the following vehicles:
Toyota ES350
Lexus ES350 GSV40
Lexus ES350 GSV60
With a direct-fit design, the GJF CV axle ensures hassle-free installation for workshops, distributors, and professional automotive repair centers.
GJF uses premium alloy steel combined with advanced heat-treatment techniques to strengthen shaft integrity. The spline teeth are precisely machined to ensure smooth engagement and stable torque transmission. Each drive shaft undergoes dynamic balancing, which minimizes vibration during high-speed rotation.
Reinforced solid axle shaft for higher torque capacity
Precision-ground joints for smoother motion
High-performance grease for long-lasting lubrication
Corrosion-resistant surface treatment for extended lifespan
Strengthened rubber boots designed to prevent cracking, leaking, and dust contamination
These design and material innovations allow the drive shaft to withstand long-term operation in diverse climates and road conditions.
The inner and outer CV joints are engineered with multi-stage ball grooves to ensure smooth articulation during steering and suspension travel. GJF uses strictly selected steel ball bearings and cage structures to minimize friction and noise.
Reduced noise and vibration
Stable torque delivery at turning angles
Enhanced joint stability for long-term performance
Optimized sealing to prevent grease leakage
The CV joint boot is made from durable rubber compounds with excellent resistance to heat, cold, moisture, and chemical exposure. This helps protect the internal assembly and greatly extends service life.
·Smooth Driving Experience
One of the core advantages of the GJF 43410-0W180 drive shaft is the ability to provide a smooth and stable ride. Thanks to precision balancing and optimized spline engagement, the axle minimizes vibration—even during high-speed acceleration or when driving over uneven surfaces.
Reduced drivetrain vibration
Improved steering stability
Consistent power delivery under load
Better handling and comfort
Drivers will experience significant improvement in road feel and noise reduction when replacing a worn OE drive shaft with the GJF unit.
GJF is committed to manufacturing reliable, long-lasting CV axles for global aftermarket customers. Every drive shaft is tested and inspected before packing.
Dynamic balancing
Hardness verification
Material inspection
Grease control and boot sealing test
Final performance simulation under working load
With decades of expertise in producing automotive transmission components, GJF is recognized by wholesalers and distributors worldwide for stable quality and competitive pricing.
The 43410-0W180 drive shaft is a high-demand model for the Toyota and Lexus ES series, making it an excellent inventory choice for:
Auto parts wholesalers
Retail stores
Repair workshops
Fleet maintenance providers
Online sellers (eBay, Amazon, Shopify)
GJF supports long-term supply, consistent product quality, and customizable packaging solutions. The brand’s red and silver packaging emphasizes professionalism and protects the axle during long-distance transportation.
GJF specializes in drive shafts, CV joints, inner joints, outer joints, tripod joints, and dust boots. Our commitment to quality makes us a preferred partner for customers targeting both aftermarket and OEM sectors.
Mature production system for transmission parts
Strong R&D capability for new models
Technical manufacturing, precision standards
Wide product range covering Asian, American, and European vehicles
Fast delivery and stable stock for popular references
GJF continues to expand its global presence, providing reliable transmission solutions for distributors, wholesalers, and automotive industry partners.
