| Quantity: | |
|---|---|
42450-60050
| Item Name | Wheel Hub Bearing |
OEM Number | 42450-60050 |
| Car Model | For Toyota 4Runner 2003-2009 |
| Bearing/Ball/roller materials | GCr15 |
| Flange materlals | 55# steel |
| Cage materlals | top grade PA66+GF25 |
| Seal materials | stainless steel+NBR |
| Wheel stud grade | 10.9 |
| Bearing rings hardness control | 60-65HRC |
This OE-replacement wheel hub bearing is engineered specifically for the Toyota 4Runner, matching factory part 42450-60050. It ensures smooth wheel rotation, reduces road noise and vibration, and maintains precise wheel alignment for enhanced driving safety and comfort. Ideal for both daily driving and off-road conditions, this unit integrates high-grade materials, advanced sealing technology, and strict quality validation to deliver durability you can trust.
Direct OE replacement for Toyota 4Runner models requiring 42450-60050.
Exact dimensional accuracy ensures no modification required during installation.
Compatible with original ABS sensors for accurate wheel-speed signaling.
Bearing rings & balls: Made from GCr15/SAE52100 bearing steel with hardness maintained at 61–66 HRC for wear resistance.
Flange & outer ring: 55# high-carbon steel, forged as a single piece for maximum strength.
Cage: PA66+GF25 high-strength polymer ensures stability under load and high-temperature conditions.
Seals: Options include FKM, NBR, PU, and PTFE—each providing waterproof, dustproof, and low-friction performance.
Bolts: Grade 10.9 with zinc coating for corrosion resistance in harsh environments.
Dynamic load rating: 23 kN (exceeds the 20 kN industry standard).
Axial play controlled within 0.04 mm (under 0.05 mm industry limit).
Salt spray tested for 700 hours—significantly above the 500-hour benchmark for rust prevention.
Low-viscosity specialty grease reduces friction and operating temperature.
Pre-adjusted clearance eliminates the need for calibration during fitting.
Integrated seal design removes the requirement for external hub seals.
Lightweight yet high-load-capacity design reduces unsprung weight.
Suitable for Toyota 4Runner front/rear axle applications (verify fitment by part number).
95%+ global vehicle coverage across passenger cars, SUVs, and light trucks.
Fast shipping: In-stock items dispatched within 5-7 business days.
Safely lift the vehicle and remove the wheel and brake caliper.
Extract the old hub bearing assembly using appropriate tools.
Clean the mounting surface on the steering knuckle.
Install the new wheel hub bearing and torque bolts to OE specifications.
Reinstall brake components and wheel, then perform a test drive.
Note: Always refer to vehicle service manual for torque values and safety procedures.
Upgrade your Toyota 4Runner with a reliable, high-performance wheel hub bearing designed for safety, longevity, and smooth operation. Click to order today and experience OE-quality engineering with aftermarket value.
*Ships in 2–3 days • 12-month warranty • Professional OEM/ODM support available*
| Item Name | Wheel Hub Bearing |
OEM Number | 42450-60050 |
| Car Model | For Toyota 4Runner 2003-2009 |
| Bearing/Ball/roller materials | GCr15 |
| Flange materlals | 55# steel |
| Cage materlals | top grade PA66+GF25 |
| Seal materials | stainless steel+NBR |
| Wheel stud grade | 10.9 |
| Bearing rings hardness control | 60-65HRC |
This OE-replacement wheel hub bearing is engineered specifically for the Toyota 4Runner, matching factory part 42450-60050. It ensures smooth wheel rotation, reduces road noise and vibration, and maintains precise wheel alignment for enhanced driving safety and comfort. Ideal for both daily driving and off-road conditions, this unit integrates high-grade materials, advanced sealing technology, and strict quality validation to deliver durability you can trust.
Direct OE replacement for Toyota 4Runner models requiring 42450-60050.
Exact dimensional accuracy ensures no modification required during installation.
Compatible with original ABS sensors for accurate wheel-speed signaling.
Bearing rings & balls: Made from GCr15/SAE52100 bearing steel with hardness maintained at 61–66 HRC for wear resistance.
Flange & outer ring: 55# high-carbon steel, forged as a single piece for maximum strength.
Cage: PA66+GF25 high-strength polymer ensures stability under load and high-temperature conditions.
Seals: Options include FKM, NBR, PU, and PTFE—each providing waterproof, dustproof, and low-friction performance.
Bolts: Grade 10.9 with zinc coating for corrosion resistance in harsh environments.
Dynamic load rating: 23 kN (exceeds the 20 kN industry standard).
Axial play controlled within 0.04 mm (under 0.05 mm industry limit).
Salt spray tested for 700 hours—significantly above the 500-hour benchmark for rust prevention.
Low-viscosity specialty grease reduces friction and operating temperature.
Pre-adjusted clearance eliminates the need for calibration during fitting.
Integrated seal design removes the requirement for external hub seals.
Lightweight yet high-load-capacity design reduces unsprung weight.
Suitable for Toyota 4Runner front/rear axle applications (verify fitment by part number).
95%+ global vehicle coverage across passenger cars, SUVs, and light trucks.
Fast shipping: In-stock items dispatched within 5-7 business days.
Safely lift the vehicle and remove the wheel and brake caliper.
Extract the old hub bearing assembly using appropriate tools.
Clean the mounting surface on the steering knuckle.
Install the new wheel hub bearing and torque bolts to OE specifications.
Reinstall brake components and wheel, then perform a test drive.
Note: Always refer to vehicle service manual for torque values and safety procedures.
Upgrade your Toyota 4Runner with a reliable, high-performance wheel hub bearing designed for safety, longevity, and smooth operation. Click to order today and experience OE-quality engineering with aftermarket value.
*Ships in 2–3 days • 12-month warranty • Professional OEM/ODM support available*
