| Quantity: | |
|---|---|
28473-SC000
| Item Name | Wheel Hub Bearing |
OEM Number | 28473-SC000 |
| Car Model | For Subaru Forester/SH 2008-2013 Legacy/BM 2007-2013 |
| Bearing/Ball/roller materials | GCr15 |
| Flange materlals | 55# steel |
| Cage materlals | top grade PA66+GF25 |
| Seal materials | stainless steel+NBR |
| Wheel stud grade | 10.9 |
| Bearing rings hardness control | 60-65HRC |
Engineered as a direct OE replacement for Subaru vehicles, this wheel hub bearing assembly corresponds to genuine part number 28473-SC000. It is specifically designed for Subaru Forester SH-series (2008-2013) and Subaru Legacy/Outback BM-platform (2007-2013) models. The unit ensures precise wheel rotation, supports vehicle weight under dynamic conditions, and maintains alignment integrity for Subaru’s Symmetrical All-Wheel Drive system. Crafted for durability, reduced noise, and longevity, it delivers reliable performance in daily commuting, all-weather driving, and light off-road use.
Direct replacement for OE number 28473-SC000, ensuring compatibility with Forester (SH) and Legacy/Outback (BM) models.
Exact OEM dimensions and mounting specs enable bolt-on installation—no modifications or adjustments needed.
Integrates seamlessly with factory ABS and wheel-speed sensors for accurate AWD control and stability system operation.
Bearing rings & rolling elements: High-grade GCr15 / SAE52100 bearing steel, heat-treated to 61–66 HRC for optimal wear resistance.
Flange & outer ring: 55# high-carbon forged steel—one-piece design enhances structural strength and impact resistance.
Cage material: PA66+GF25 engineering thermoplastic maintains dimensional stability under high rotational speeds and temperature fluctuations.
Seal selection: Options include FKM (Viton), NBR, PU, and PTFE—each tailored for superior water, dust, and contaminant exclusion with low friction loss.
Wheel studs: Grade 10.9 high-tensile bolts with zinc coating for corrosion protection in winter or coastal environments.
Dynamic load capacity: 23 kN—exceeds common industry benchmarks by approximately 15%.
Axial play controlled within 0.04 mm, ensuring smooth operation and reduced vibration transmission.
Salt spray resistance tested to 700 hours—provides extended defense against rust and corrosion.
Pre-lubricated with low-viscosity, high-stability grease formulated for consistent performance across a wide temperature range (-40°C to +150°C).
Pre-set bearing clearance eliminates the need for shimming or adjustment during installation.
Integrated multi-lip seal design removes requirement for additional hub seals, saving time and parts.
Lightweight yet high-load design contributes to maintained suspension response and fuel efficiency.
Standard orders ship within 5–7 business days.
Backed by a 12-month or 60,000-kilometer warranty (whichever occurs first).
OEM/ODM support available for custom branding and packaging (MOQ negotiable).
Safely lift the vehicle, remove the wheel and brake caliper/rotor assembly.
Unbolt and carefully extract the existing hub bearing using appropriate puller tools if necessary.
Thoroughly clean the knuckle mating surface to ensure proper seating and alignment.
Install the new hub bearing assembly, tightening bolts in a star pattern to the manufacturer-specified torque values.
Reinstall brake components and wheel, then perform a low-speed test to verify smooth rotation and absence of noise.
Note: Always consult the official Subaru service manual for model-specific torque specs and safety procedures.
✅ Model-Specific Engineering – Designed explicitly for Subaru Forester and Legacy/Outback platforms.
✅ Enhanced Protection – Advanced sealing and corrosion resistance for all-weather and rugged road use.
✅ Noise & Vibration Reduction – Precision tolerances and premium materials minimize NVH (noise, vibration, harshness).
✅ Trusted Warranty – 12-month protection gives peace of mind.
✅ Fast Order Fulfillment – Ready inventory ensures quick delivery for repair shops and enthusiasts.
Restore your Subaru's smooth, quiet, and confident drive with a durable, precision-engineered wheel hub bearing designed for compatibility, safety, and extended service life. Ideal for daily drivers, all-weather commuters, and light adventure use.
| Item Name | Wheel Hub Bearing |
OEM Number | 28473-SC000 |
| Car Model | For Subaru Forester/SH 2008-2013 Legacy/BM 2007-2013 |
| Bearing/Ball/roller materials | GCr15 |
| Flange materlals | 55# steel |
| Cage materlals | top grade PA66+GF25 |
| Seal materials | stainless steel+NBR |
| Wheel stud grade | 10.9 |
| Bearing rings hardness control | 60-65HRC |
Engineered as a direct OE replacement for Subaru vehicles, this wheel hub bearing assembly corresponds to genuine part number 28473-SC000. It is specifically designed for Subaru Forester SH-series (2008-2013) and Subaru Legacy/Outback BM-platform (2007-2013) models. The unit ensures precise wheel rotation, supports vehicle weight under dynamic conditions, and maintains alignment integrity for Subaru’s Symmetrical All-Wheel Drive system. Crafted for durability, reduced noise, and longevity, it delivers reliable performance in daily commuting, all-weather driving, and light off-road use.
Direct replacement for OE number 28473-SC000, ensuring compatibility with Forester (SH) and Legacy/Outback (BM) models.
Exact OEM dimensions and mounting specs enable bolt-on installation—no modifications or adjustments needed.
Integrates seamlessly with factory ABS and wheel-speed sensors for accurate AWD control and stability system operation.
Bearing rings & rolling elements: High-grade GCr15 / SAE52100 bearing steel, heat-treated to 61–66 HRC for optimal wear resistance.
Flange & outer ring: 55# high-carbon forged steel—one-piece design enhances structural strength and impact resistance.
Cage material: PA66+GF25 engineering thermoplastic maintains dimensional stability under high rotational speeds and temperature fluctuations.
Seal selection: Options include FKM (Viton), NBR, PU, and PTFE—each tailored for superior water, dust, and contaminant exclusion with low friction loss.
Wheel studs: Grade 10.9 high-tensile bolts with zinc coating for corrosion protection in winter or coastal environments.
Dynamic load capacity: 23 kN—exceeds common industry benchmarks by approximately 15%.
Axial play controlled within 0.04 mm, ensuring smooth operation and reduced vibration transmission.
Salt spray resistance tested to 700 hours—provides extended defense against rust and corrosion.
Pre-lubricated with low-viscosity, high-stability grease formulated for consistent performance across a wide temperature range (-40°C to +150°C).
Pre-set bearing clearance eliminates the need for shimming or adjustment during installation.
Integrated multi-lip seal design removes requirement for additional hub seals, saving time and parts.
Lightweight yet high-load design contributes to maintained suspension response and fuel efficiency.
Standard orders ship within 5–7 business days.
Backed by a 12-month or 60,000-kilometer warranty (whichever occurs first).
OEM/ODM support available for custom branding and packaging (MOQ negotiable).
Safely lift the vehicle, remove the wheel and brake caliper/rotor assembly.
Unbolt and carefully extract the existing hub bearing using appropriate puller tools if necessary.
Thoroughly clean the knuckle mating surface to ensure proper seating and alignment.
Install the new hub bearing assembly, tightening bolts in a star pattern to the manufacturer-specified torque values.
Reinstall brake components and wheel, then perform a low-speed test to verify smooth rotation and absence of noise.
Note: Always consult the official Subaru service manual for model-specific torque specs and safety procedures.
✅ Model-Specific Engineering – Designed explicitly for Subaru Forester and Legacy/Outback platforms.
✅ Enhanced Protection – Advanced sealing and corrosion resistance for all-weather and rugged road use.
✅ Noise & Vibration Reduction – Precision tolerances and premium materials minimize NVH (noise, vibration, harshness).
✅ Trusted Warranty – 12-month protection gives peace of mind.
✅ Fast Order Fulfillment – Ready inventory ensures quick delivery for repair shops and enthusiasts.
Restore your Subaru's smooth, quiet, and confident drive with a durable, precision-engineered wheel hub bearing designed for compatibility, safety, and extended service life. Ideal for daily drivers, all-weather commuters, and light adventure use.
