Japanese Car Spare Parts Wheel Hub Bearing For Toyota PRIUS 42450-47040

Product Details:

Japanese Car Spare Parts: Premium Wheel Hub Bearing for TOYOTA PRIUS Hybrid Models

Product Overview

This advanced wheel hub bearing is precision-engineered as a direct OE replacement for Toyota Prius hybrid vehicles, corresponding to genuine part number 42450-47040. Specifically designed for Toyota Prius (2010-2015), Prius Plug-in Hybrid (2014-2015), and Prius 1.8 Hybrid (2009 onward), this component ensures smooth, quiet, and efficient wheel rotation critical for hybrid vehicle performance. It supports regenerative braking compatibility, reduces rotational resistance for improved energy efficiency, and delivers the low-noise operation expected in electric and hybrid driving modes.

GJF Wheel Hub Bearing 

Key Features & Technical Advantages

✅ Hybrid-Specific Engineering for Optimal Performance

• Direct OE replacement for 42450-47040, ensuring perfect compatibility with multiple Prius generations and configurations.

• Designed to support regenerative braking systems without interference with ABS/vehicle stability sensors.

• Precision-balanced to minimize rotational mass, contributing to enhanced electric driving range.

✅ Premium Materials for Durability & Efficiency

• Bearing components: GCr15/SAE52100 bearing steel with consistent hardness control at 61-66 HRC.

• Flange design: 55# forged steel with one-piece construction for structural reliability under hybrid powertrain dynamics.

• Low-friction cage: PA66+GF25 engineering polymer reduces internal drag and supports high-efficiency operation.

• Advanced sealing options: FKM, NBR, PU, and PTFE seals available to match varying environmental and usage conditions.

• Corrosion-protected hardware: Grade 10.9 zinc-coated wheel studs ensure longevity in diverse climates.

✅ Rigorous Testing for Hybrid Vehicle Demands

• High dynamic load rating of 23 kN ensures durability under varying hybrid torque loads.

• Axial clearance controlled to 0.04 mm for smooth operation and reduced vibration transfer to cabin.

• Extended 700-hour salt spray resistance protects against corrosion in all weather conditions.

• Low-viscosity, high-temperature grease formulated for consistent performance in electric-only and combined driving modes.

✅ Quiet Operation & Energy Efficiency

• Optimized for low NVH (Noise, Vibration, Harshness) to complement the quiet nature of hybrid driving.

• Reduced rolling resistance contributes to overall vehicle energy efficiency.

• Precision tolerances ensure consistent performance in both electric motor and engine-assisted driving

Wheel Hub Bearing Installation & Compatibility Guidelines

Recommended Installation Procedure:

1. Ensure vehicle is securely lifted with hybrid system properly disabled

2. Remove wheel, brake caliper, and rotor assembly

3. Disconnect ABS sensor connection if required

4. Remove existing hub bearing using appropriate extraction tools

5. Clean all mounting surfaces on steering knuckle

6. Install new hub bearing assembly, torquing to manufacturer specifications

7. Reconnect all electrical connections and reassemble brake components

8. Perform system check and test drive

Hybrid-Specific Considerations:

• Special care recommended when working near high-voltage components

• Ensure ABS sensor alignment for proper regenerative braking functionality

• Verify wheel speed sensor operation post-installation